Newton Boats 26' Sportfish features over 128 square feet of floor and deck space, large built-in storage and ice chests. Our 26'x10' Sportfish is sure to please.  

Quality in design, workmanship and materials . . . Designed by renowned naval architect Dave Sintes in New Orleans, and built with painstaking attention to detail, this vessel is one you will be proud to own and operate. As with all Newton Boats, our 26' Sportfish is built to A.B.S. specifications, incorporating fiberglass stringers and built-to-last durability.

Engine Accessibility . . . Thoughtful planning and engineering have resulted in a combination center console and engine housing which allows complete access and provides necessary room for normal engine maintenance.

Insulated for noise containment and hinged for painless access, you will appreciate how easy your 26' Sportfish is to maintain and enjoy!

Newton 26'x10' Center Console Specifications

  • Pilot Chair
  • (4) 10" Cleats
  • (2) Rule 2000 Bilge Pumps
  • (1) 8-D Battery
  • (1) 6 Gang Switch Panel
  • Anti-Fouling Bottom Paint
  • (1) Brass Water Strainer
  • (1) Bolt Type Shaft Port 
  • (1) Rudder Collar
  • (1) Tiller Arm
  • Control Cable
  • (1) S.S. V-Strut
  • Navigation Light
  • Sea Trials
  • 80 Gal. Alum. Fuel Tank
  • (1) Racor 1000 Fuel Filter
  • Fiberglass Exhaust Tubing
  • Exhaust Hose
  • Rub Rails
  • (1) Rudder Mount
  • Hydraulic Ram System
  • Hydraulic Steering System
  • S.S. Destroyer Wheel
  • Throttle Shift Control
  • (1) 1½" S.S. Rudder
  • (1) 2" S.S. Shaft
  • (1) Prop, Nuts, Cotterpins
Miscellaneous nuts, bolts, fittings hose clamps & marine sealant
Complete with (1) 300 HP 3126 Cat Engine
All boats FOB Slidell, LA
All specifications are subject to change without notice.
Depth of Boat: 5½  feet
Chine to Chine: 8 feet
Transom Deadrise:10°
Side Ht. of Transom at Stern: 37"
Lowest Point on Sides: 37"
Hull: 100% hand laid
Stringers Installed: 6
Lay-ups Installed:
   Sides: (4) 1½ oz. mats
              (4) 24 oz. woven Rovings
   Bottom: (6) 1½ oz. mats
                  (6) 24 oz. woven Rovings
FRP material: Isophthalic resin & gel-coat
Deck Construction: PVC foam cored composite

Engine Specifications

CAT 3126: 300 HP
Diesel
Top Speed:
36 mph
Cruising Speed: 30 mph
Overall Length: 26' 0"
Beam: 10' 0"
Transom Deadrise:
Displacement: 6,000 lbs.
Stringer Construction: Fiberglass
Laminate Schedule:

   Sides: (3) 1½ oz. mats
              (3) 24 oz. woven Rovings
   Bottom: (4) 1½ oz. mats
                  (4) 24 oz. woven Rovings
 


Newton Boats, Inc.  •  56181 Beach Drive  •  P.O. Box 746  •  Slidell, LA 70458
(985) 643-3258  •  1-877-573-3536  •  Fax (985) 646-3425  • 
info@newtonboats.com